/
/
/
Winter Laser Water Cooler Considerations
ma
title
Check category

Winter Laser Water Cooler Considerations

Winter Laser Water Cooler Considerations

icon icon icon icon

(Summary description)    Should seek to ensure that the ambient temperature can not be lower than 5 degrees Celsius, in order to meet the normal use of the laser conditions, to avoid resulting in failure or affect the stability of the laser performance.

Winter Laser Water Cooler Considerations

(Summary description)    Should seek to ensure that the ambient temperature can not be lower than 5 degrees Celsius, in order to meet the normal use of the laser conditions, to avoid resulting in failure or affect the stability of the laser performance.

Information

1.Make sure that the laser runs normally

    Should seek to ensure that the ambient temperature can not be lower than 5 degrees Celsius, in order to meet the normal use of the laser conditions, to avoid resulting in failure or affect the stability of the laser performance.

2.Avoid laser water cooler icing in the low temperature environment.

    1.The recommended method to prevent icing is to keep the water cooler and laser at a temperature above 0°C at all times. 2.

   2. If the above conditions are not met, keep the laser and water cooler on at all times. If the water in the piping is always flowing, it will prevent ice formation. Of course, in this case, if the water cooler stops for a long time due to malfunction or power failure, there is also a risk of ice formation. 3.

    3. during holidays such as Chinese New Year, if you can't do the above two points, you can try to drain the water in the water tank and piping of the laser and water cooler.

  After that, note that.

    For water coolers with antifreeze added, be sure to change back to normal cooling water and change back to the original parameters after the winter months. Before changing the water, please flush the entire water tank and lines completely with the antifreeze before changing the water normally. Replace the deionizer as well as the water change.

  If the water cooler and laser will not be used for a long period of time, it is necessary to drain as much water as possible from the water tank and piping of both.

    1. Drain the water from the water cooler tank first in the usual manner.

    2. and then try to drain as much water as possible from the water cooler line. Remove the hose from the water cooler and use compressed gas to ventilate each of the 4 inlets and outlets until the water in the water cooler line is mostly drained out. 3.

    After removing the top and bottom of the deionizer bucket, use compressed gas to blow the residual water out of the bucket from top to bottom. Then connect the top and bottom plumbing back to the deionizing barrel. This will basically ensure that the deionization tank will not freeze and crack. 4.

    Remove the water inlet and outlet pipes from the laser end, and use compressed gas to ventilate the four inlets and outlets until the water in the water path inside the laser is basically drained out. 5.

    Finally, drain the water from the laser and the other water lines outside the water cooler.

Links:

搜索
Search
  • skype
logo
Top
微信公众号