/
/
/
With these tricks, Roffin lasers have a great summer!
ma
title
Check category

With these tricks, Roffin lasers have a great summer!

With these tricks, Roffin lasers have a great summer!

icon icon icon icon

(Summary description)High summer temperatures and high humidity make it a high season for laser failures. It is necessary to protect the laser from heat, humidity and humidity. We use ROFIN lasers for the majority of users support a few tricks, the package you summer worry-free.

With these tricks, Roffin lasers have a great summer!

(Summary description)High summer temperatures and high humidity make it a high season for laser failures. It is necessary to protect the laser from heat, humidity and humidity.


We use ROFIN lasers for the majority of users support a few tricks, the package you summer worry-free.

Information

        High summer temperatures and high humidity make it a high season for laser failures. It is necessary to protect the laser from heat, humidity and humidity.

        We use ROFIN lasers for the majority of users support a few tricks, the package you summer worry-free.

 

Fiber Lasers (FL Series)

 

1. once a week, clean the water cooler heat sinks and the outside heat sinks in the air conditioning room of the laser, blow out the dust, and check that the refrigerant is working properly.

2. high temperature environment will accelerate the growth of algae. Check the water quality of the water cooler once a week, if the water quality deteriorates, it should be replaced in time; clean the filter cartridge once a week, if it is difficult to clean, it should be replaced with a new filter cartridge.

3. The laser must be placed in a well-sealed air conditioning room; air conditioning 24 hours running (refrigeration mode below 20 ℃).

If you use dual-temperature water cooler, the external optical path water temperature is set between 30-33 ℃, its fluctuation must be controlled within the range of ± 1 ℃; if you use a single-temperature water cooler, you must blow dry air or high-purity nitrogen near the cutting head and QBH head. This measure will prevent condensation. 5.

When liquid gas is used as cutting gas or protective gas, a gasifier must be used, and the length of the gas pipe from the gasifier to the cutting head or welding head should be >10m.

 


Carbon Dioxide Lasers (DC Series)

 

1. once a week, clean the water cooler heat sinks and the outside heat sinks in the air conditioning room of the laser, blow out the dust, and check that the refrigerant is working properly.

2. high temperature environment will accelerate the growth of algae. Check the water quality of the water cooler once a week, if the water quality deteriorates, it should be replaced in time; clean the water cooler filter once a week, if it is difficult to clean, it should be replaced with a new filter.

The laser is recommended to be placed in a well-sealed air conditioning room; the air conditioner should run 24 hours (refrigeration mode below 20℃).

If the laser is not installed in the air conditioning room, the water temperature of the water cooler should be adjusted upward to 26-27 degrees. After adjusting the water temperature upwards, check the condition of the optical path to see if there is any deviation.

Adapted from an article by the public number "Dresdner & Rolfing".

Links:

搜索
Search
  • skype
logo
Top
微信公众号